The Ford Barn - View Single Post - Freshly Rebuilt 59AB Help Needed, Near end of my Rope

chuck stevens · 04-18-2016, 06:55 AM

Tim, When you take out the cam I would be interested in what it mic's out to. You can hold the valves open with a small pieces of wood, turn the engine upside down
so the liftters drop down. Check the size of the inside of the bearings with the outside of the cam. It's alot to go though but now is the time to find out. Chuck S.

04-18-2016, 06:55 AM	#44
chuck stevens Senior Member Join Date: May 2010 Location: upstate new york Posts: 758	Re: Freshly Rebuilt 59AB Help Needed, Near end of my Rope Tim, When you take out the cam I would be interested in what it mic's out to. You can hold the valves open with a small pieces of wood, turn the engine upside down so the liftters drop down. Check the size of the inside of the bearings with the outside of the cam. It's alot to go though but now is the time to find out. Chuck S.