The Ford Barn - View Single Post

Mario · 12-15-2010, 06:03 PM

Thanks for the came back.

I'm using a stainles steel tank from Tanks Inc. The weld seam is about 1/4" from the edge. Not enough room to trim before I hit the weld. I thought I might rise the tank with an additional rubber pad but I don't know if the extra height will interfere with the body. I don't have the body as yet!

12-15-2010, 06:03 PM	#4
Mario Junior Member Join Date: Dec 2010 Location: New Jersey Posts: 2	Re: 1932 Ford Fuel Tank Installation Thanks for the came back. I'm using a stainles steel tank from Tanks Inc. The weld seam is about 1/4" from the edge. Not enough room to trim before I hit the weld. I thought I might rise the tank with an additional rubber pad but I don't know if the extra height will interfere with the body. I don't have the body as yet!