Quote:
Originally Posted by BRENT in 10-uh-C
I believe your logic may have backfired on you. PPG's Concept is rarely ever used in the collision industry simply because it is a single-stage material whereas the overwhelming majority of paint used in the collision field is BC/CC. Second, in the collision world, it is the insurance company's who have effectively caused the paint manufacturers to now produce a cheaper quality of paint (Omni, Nason, Limco, etc.) ...because as you stated, most of the consumers do not know the difference. Third, if you have ever looked at cheap implement paint after it has been sprayed for a year or so, there are two distinct characteristics, -the pigments are always cloudy, and the sheen has always died down. The bottom line is just this, there are different quality levels of reproduction parts for our Model-A, and there are different quality levels of paints. For some hobbyists, they cannot tell the difference between a quality reproduction part and an inferior repro part. Others, can easily spot the differences.
|
I like reasoned civil discussions regarding issues like this. I concede your point about collision work. But I have not been convinced by any specific hard information that any brand of paint is worth over $500 a gallon, nor that it is needed for our model A's. For reasonably priced paint you stated, "after a year...there are two distinct characteristics, -the pigments are always cloudy, and the sheen has always died down". But why? Are they more susceptible to UV light, oxidation, or air pollution? I do believe that even the most economical paint of today has to be better at retaining color & shine than the nitrocellulose lacquer originally used on model A's. Almost all period photos of model A's shows an almost flat finish!
So lets accept that $500/gallon paint will provide superior protection against UV light, air pollution, and oxidation. There is still the question of, does our pampered model A's that rarely see a rain drop, and spend 95% of their life under cover inside, really need $500/gallon worth of protection?
Let me be clear. If I was going to have any work done to my model A I would send it to Brent. (If I could afford him.) His pursuit of excellence is inspiring. But in this case I need to know exactly what I would be getting for my money before spending over $500/gallon to use the elite brand.