The Ford Barn - View Single Post

Barn Junk · 02-22-2016, 05:34 PM

The worst rust in my opinion is the kind between two spot welded seams and may not be even holes, YET. You know it's there because the metal is bulged out between the spot welds. Then both pieces of metal have to be removed and replaced to get it right. Happens a lot at the rear wheel wells, lower front cowl and at the lower sill under the doors on 33-34s. Floor board seams also.

02-22-2016, 05:34 PM	#8
Barn Junk Senior Member Join Date: May 2010 Location: WA state Posts: 771	Re: aprx value of 34 ford 3 window The worst rust in my opinion is the kind between two spot welded seams and may not be even holes, YET. You know it's there because the metal is bulged out between the spot welds. Then both pieces of metal have to be removed and replaced to get it right. Happens a lot at the rear wheel wells, lower front cowl and at the lower sill under the doors on 33-34s. Floor board seams also.