The Ford Barn - View Single Post

Willit Stop · 02-17-2016, 12:34 PM

A redneck approach: Turn a 5/8 or larger 3/8 drive socket backwards.Put the drive end of the socket on the plug, then a 5/8 or larger nut halfway into the socket. Next,use an end wrench on the nut. Might work.

02-17-2016, 12:34 PM	#4
Willit Stop Senior Member Join Date: Feb 2013 Location: Eureka Calif. Posts: 1,007	Re: tool to remove a pipe plug? A redneck approach: Turn a 5/8 or larger 3/8 drive socket backwards.Put the drive end of the socket on the plug, then a 5/8 or larger nut halfway into the socket. Next,use an end wrench on the nut. Might work.