The Ford Barn - View Single Post

garyjohn · 02-01-2016, 01:24 AM

How about the rope trick. I have used it and it works great. You put equal amounts of rope in the number one and four cylinders to fill it up and then turn over the motor and as the pistons come up they push the rope up and push the head up. cost is about $5.00 or less and no machining needed.

02-01-2016, 01:24 AM	#40
garyjohn Senior Member Join Date: May 2012 Location: Big Pine,CA Posts: 161	Re: TECH: Homemade Head Puller that works! How about the rope trick. I have used it and it works great. You put equal amounts of rope in the number one and four cylinders to fill it up and then turn over the motor and as the pistons come up they push the rope up and push the head up. cost is about $5.00 or less and no machining needed.