View Single Post
Old 01-25-2016, 12:13 AM   #7
Karl Wolf
Senior Member
 
Karl Wolf's Avatar
 
Join Date: May 2010
Location: Mill Valley,Ca.
Posts: 1,555
Default Re: Flywheel ring gear.....

Quote:
Originally Posted by jake197000 View Post
u can knock it off with a punch.clean everything,lay the new one one the flywheel in the correct direction.go round it with acetilinene torch itwill drop right on.may be a tap or two to seat it. its easy.just dont turn it red.good luck. its fun!
X2... But, I've used vise grips, hold it up, torch in the other hand- heat up to hot, not red. Drops on.

Karl
Karl Wolf is offline   Reply With Quote