The Ford Barn - View Single Post

29AVEE8 · 12-06-2015, 03:26 PM

You didn't indicate what the fitment issues are, but if you are using the Merc. half bell the long style PP's will not fit because the counterweights will contact the half bell. Is that the issue? The Merc. half bell is designed to be used with a Borg and Beck PP. If that is the case use the truck half bell as those were designed for the Long PP.

Edit: Oops, I missed the bolt hole mismatch in your original post.

12-06-2015, 03:26 PM	#9
29AVEE8 Senior Member Join Date: Dec 2010 Location: Redlands, CA Posts: 148	Re: 8ba flywheel and clutch question You didn't indicate what the fitment issues are, but if you are using the Merc. half bell the long style PP's will not fit because the counterweights will contact the half bell. Is that the issue? The Merc. half bell is designed to be used with a Borg and Beck PP. If that is the case use the truck half bell as those were designed for the Long PP. Edit: Oops, I missed the bolt hole mismatch in your original post. __________________ Ignorance of the laws of physics does not mean they do not apply to you. Last edited by 29AVEE8; 12-06-2015 at 03:41 PM. Reason: I misread the original post.