Re: Reconditioned 37 rods
Quote:
Originally Posted by JWL
Rub the rod bores with some 400 grit and they will be good. There is a cushion of oil between rod housing and bearing surface. The rod surface should never be in solid contact with the bearing surface. If the oil is not present something else is wrong.
|
I would highly respect JWL's opinion and do exactly what he said. JMHO
PS...not meaning any disrespect for the other's who replied.
__________________
John
"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
Last edited by JM 35 Sedan; 12-03-2015 at 07:17 AM.
|