The Ford Barn - View Single Post

Mitch//pa · 10-03-2015, 01:37 AM

what kurt and tom said..

check to make sure your brake cross shaft is adjusted properly and positioned at the proper angle. this is imperative to keep it from hitting.
it should only pivot very little to actuate the brakes

10-03-2015, 01:37 AM	#4
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: cross shaft/ motor mount? what kurt and tom said.. check to make sure your brake cross shaft is adjusted properly and positioned at the proper angle. this is imperative to keep it from hitting. it should only pivot very little to actuate the brakes