The Ford Barn - View Single Post

Jerry in Shasta · 10-01-2015, 11:00 PM

I had that problem, when my flywheel was resurfaced, to much.

I used Chev flywheel bolts which have a thinner head, then locked them in place with a STRONG thread locker.

JB

10-01-2015, 11:00 PM	#10
Jerry in Shasta Senior Member Join Date: Jun 2010 Location: (Old)Shasta (Redding) CA Posts: 388	Re: The four flywheel bolts I had that problem, when my flywheel was resurfaced, to much. I used Chev flywheel bolts which have a thinner head, then locked them in place with a STRONG thread locker. JB