View Single Post
Old 09-27-2015, 11:45 AM   #6
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 4,388
Default Re: Still dripping oil from flywheel housing cotter pin

Sponsored Links (Register now to hide all advertisements)
The leakage out of the flywheel housing can be motor oil and transmission oil. Make certain that the engine's breather pipe and the transmissions vent hole in the gearshift tower are not obstructed.

There are some breather caps that obstruct when pushed firmly down on the engine's breather. Check your cap. It should have tabs that stop it from closing-off the breather.
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote