The Ford Barn - View Single Post

Tom Wesenberg · 09-27-2015, 10:27 AM

I would pull the tranny and work on the bench. The shaft for the cluster gear should be driven out the front of the case. There is a good chance you will also need some bearings and a cluster gear.

09-27-2015, 10:27 AM	#5
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Bad knock in 2nd gear UPDATE I would pull the tranny and work on the bench. The shaft for the cluster gear should be driven out the front of the case. There is a good chance you will also need some bearings and a cluster gear.