Quote:
Originally Posted by Floats
Glen,
I have removed my wheel without a puller.
Sitting behind the wheel, turn the wheel in the plus position, ( + ) and with open palms, hit the wheel upwards on the intersections of the spoke and the ring, left, right, left, right. Try to set up a L, R vibration rather than brute force. Turn the wheel 90 degrees and repeat.
I have had success with removing the wheel on my A as well as my Chevy.
Take care not to break or crack the wheel.
Good luck and enjoy the show.
|
ill try that on newer iron before i get the puller out by bracing on the brake pedal,,,but on an old wheel it will crack... thats why i didnt mention it earlier when the OP asked..