The Ford Barn - View Single Post - Power steering

Ole Don · 11-21-2010, 02:42 PM

There are serval that will bolt on. A reworked integral PS unit made to fit a 55 Chev can be made to work, but only if you have an automtic trans. The clutch likage wont fit with that unit on. There are rack and pinion systems available, but they work best with a different engine. With a Y block, the oil pump, oil filter, clutch linage and steering head all need the same space. The stock systems are still out there, dont giv eup. It took me years to find mine.

11-21-2010, 02:42 PM	#4
Ole Don Senior Member Join Date: May 2010 Location: St. Michael, Minnesota Posts: 1,713	Re: Power steering - 1954 There are serval that will bolt on. A reworked integral PS unit made to fit a 55 Chev can be made to work, but only if you have an automtic trans. The clutch likage wont fit with that unit on. There are rack and pinion systems available, but they work best with a different engine. With a Y block, the oil pump, oil filter, clutch linage and steering head all need the same space. The stock systems are still out there, dont giv eup. It took me years to find mine.