The Ford Barn - View Single Post - 39-42 heads

Karl Wolf · 11-19-2010, 09:51 PM

I thiink that the dome is a different shape for the 3 1/16'' pistons, the center leaves a big gap on the top of the 3 5/16'' piston... I looked to use a set on an engine I am building now, did not like the taller dome... Karl

11-19-2010, 09:51 PM	#2
Karl Wolf Senior Member Join Date: May 2010 Location: Mill Valley,Ca. Posts: 1,555	Re: 39-42 heads I thiink that the dome is a different shape for the 3 1/16'' pistons, the center leaves a big gap on the top of the 3 5/16'' piston... I looked to use a set on an engine I am building now, did not like the taller dome... Karl