Re: Truck based woody
GB,
If you notice, the area between the wheel wells is sheet metal. The piece consists of five parts; the two wells, two side sections, and a center section. All the pieces are spot welded at flanges, except the wells, that are spot welded on the main surface. The wood floors consist of a front frame made of maple and oak and two floor boards inside the frame, made of 11/16 thick 5 ply plywood. The rear sections on either side of the wheel wells/floor pan, are maple floor boards running perpendicular to the frame and fastened to the frame and pan.
Keep V-8ing and 4-banging!
__________________
She just don't have the appetite
For gas somehow,
And Dad, I got four carburetors
Hooked up on it now.
I tried to hook another
To see if I'd do a little good,
But ain't no place to put it
'Less I perforate the hood.
Wanted, lower side sections of 32 radiator cowl.
|