The Ford Barn - View Single Post - Help with 7.00X17 tires, Budd wheels, '39 3/4 ton followed me home

Bob C · 08-17-2015, 01:20 PM

The tonner was 122" also.
When you get the lock ring pushed down a little look for two cutaways 180 degrees
apart, these cutaways allow the ring to slip over the rim.

Bob

08-17-2015, 01:20 PM	#4
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 9,599	Re: Help with 7.00X17 tires, Budd wheels, '39 3/4 ton followed me home The tonner was 122" also. When you get the lock ring pushed down a little look for two cutaways 180 degrees apart, these cutaways allow the ring to slip over the rim. Bob Last edited by Bob C; 08-17-2015 at 01:26 PM.