The Ford Barn - View Single Post

AnthonyG · 07-16-2015, 06:29 PM

Running a '35 with rods detached and fixed against chassis with SS bands so no rattles, can attach later in case I want to. Have aftermarket adapters as I run a perf 8ba 200 hp and have detachable bell housing and will need the adapters if I decide to use. I am an aggressive driver and no chatter issues yet. 2000 miles on fresh clutch, PP, FW and thrust bearing.

07-16-2015, 06:29 PM	#10
AnthonyG Senior Member Join Date: May 2013 Location: Pa. Posts: 2,228	Re: Flathead torque rods Running a '35 with rods detached and fixed against chassis with SS bands so no rattles, can attach later in case I want to. Have aftermarket adapters as I run a perf 8ba 200 hp and have detachable bell housing and will need the adapters if I decide to use. I am an aggressive driver and no chatter issues yet. 2000 miles on fresh clutch, PP, FW and thrust bearing. __________________ Nomad