07-16-2015, 04:56 PM
|
#9
|
|
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,916
|
Re: Flathead torque rods
41Joe:There were aftermarket anti-chatter rods that look like the one in the photo. Plus you could also make your own. The "hooked end" attaches to the rear part of the "x" member. The other end bolts to the bellhousing. Here's more info. http://www.fordbarn.com/forum/showth...i+chatter+rods
Also, type the words "anti chatter rods" into the Fordbarn search box and lots more info. will appear.
Last edited by 19Fordy; 07-16-2015 at 05:08 PM.
|
|
|