View Single Post
Old 06-07-2015, 10:03 PM   #4
Benson
Senior Member
 
Benson's Avatar
 
Join Date: May 2010
Posts: 2,618
Default Re: What's the cause & solution

Could be that the vent hole is plugged up in the transmission tower right below the shift lever.

Hole is in the rear of the transmission tower ... hole is about 1/8th inch or so.

Note: hole is even with or below where the floor board meets the tower as I remember.

Floor board must be removed to see where hole is.

Vent is usually plugged with dirt and pressure builds up and blows oil out of transmission.
Benson is offline   Reply With Quote