The Ford Barn - View Single Post

Charles Coe · 05-31-2015, 04:20 PM

The bearing and seal should come off with the hub. The seal should be a press fit inside the hub once the bearing is inserted. There should also be a snap ring installed after the seal.

05-31-2015, 04:20 PM	#2
Charles Coe Senior Member Join Date: May 2010 Location: Pace, FL near Pensacola Posts: 374	Re: Rear axle seal The bearing and seal should come off with the hub. The seal should be a press fit inside the hub once the bearing is inserted. There should also be a snap ring installed after the seal. Last edited by Charles Coe; 05-31-2015 at 04:26 PM.