The Ford Barn - View Single Post

Graeme / New Zealand · 05-22-2015, 06:27 PM

My fuel gauge in my Mustang wasn't working so I took the wire off at the sender in the tank and shorted that out with a jumper wire. The gauge moved to full when I turned on the ignition (as JSeery says). If that works its your sender that is is stuffed.

GB

05-22-2015, 06:27 PM	#5
Graeme / New Zealand Senior Member Join Date: May 2010 Location: Lower Hutt , New Zealand Posts: 2,167	Re: 1940 ford resistor My fuel gauge in my Mustang wasn't working so I took the wire off at the sender in the tank and shorted that out with a jumper wire. The gauge moved to full when I turned on the ignition (as JSeery says). If that works its your sender that is is stuffed. GB __________________ "you can't make honey out of dog sh*t" "You're a long time looking at the lid"