The Ford Barn - View Single Post

JWL · 05-09-2015, 04:11 AM

If the push rod is 1" longer than necessary there is no way in hell the fuel pump can be installed. If the new found pushrod is the same length as the original it should work but what is wrong with the original? The 2 rod lengths are 8 7/8" and 7 7/8". The travel is .200, not .020.

05-09-2015, 04:11 AM	#3
JWL Member Emeritus Join Date: May 2010 Location: Fitzgerald, Georgia Posts: 2,204	Re: Fuel push rod question ( noise ) If the push rod is 1" longer than necessary there is no way in hell the fuel pump can be installed. If the new found pushrod is the same length as the original it should work but what is wrong with the original? The 2 rod lengths are 8 7/8" and 7 7/8". The travel is .200, not .020.