The Ford Barn - View Single Post

Bruce in southern OH · 05-02-2015, 05:59 AM

Dumb Person, never used the tool like you said, real quick, just put spring in this type of shoe installation, install one shoe in cylinder and then pull the other shoe over into the wheel cylinder, DONE. ( You can also do the crossover method, cross the shoes over at bottom with bottom of shoe removed from pins, spring in top of shoes, open the shoes with the leverage you have and DONE, install washer and cotter pins ) Best way to remove also!!!

05-02-2015, 05:59 AM	#20
Bruce in southern OH Senior Member Join Date: May 2010 Location: Proctorville Posts: 1,606	Re: So, how do you do it? Dumb Person, never used the tool like you said, real quick, just put spring in this type of shoe installation, install one shoe in cylinder and then pull the other shoe over into the wheel cylinder, DONE. ( You can also do the crossover method, cross the shoes over at bottom with bottom of shoe removed from pins, spring in top of shoes, open the shoes with the leverage you have and DONE, install washer and cotter pins ) Best way to remove also!!!