The Ford Barn - View Single Post

vern hodgson · 04-24-2015, 01:07 AM

I did it to a 30 roadster in the 70's, car had been lowered. I picked up a subframe from a rodder and welded it back onto the body. Not a professional welder, no big deal, just be sure on your cuts, matching up to the body and your measurements. Used gas welder.

04-24-2015, 01:07 AM	#9
vern hodgson Senior Member Join Date: Dec 2014 Location: langley, wa. Posts: 645	Re: can you unchop a top? I did it to a 30 roadster in the 70's, car had been lowered. I picked up a subframe from a rodder and welded it back onto the body. Not a professional welder, no big deal, just be sure on your cuts, matching up to the body and your measurements. Used gas welder.