The Ford Barn - View Single Post

Mike V. Florida · 04-23-2015, 10:06 PM

It depends on metal working and welding skill level. Not something an non professional would undertake and I would thing most pros would also stay away.

You might ask on the different rod sites and see it you can get the metal they cut off to chop theirs. At least then most of the work would be welding.

04-23-2015, 10:06 PM	#2
Mike V. Florida Senior Member Join Date: May 2010 Location: Florida between Sarasota and TampaSouth Florida Posts: 14,054	Re: can you unchop a top? It depends on metal working and welding skill level. Not something an non professional would undertake and I would thing most pros would also stay away. You might ask on the different rod sites and see it you can get the metal they cut off to chop theirs. At least then most of the work would be welding. __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II