The Ford Barn - View Single Post - powder coating - did not turn out well, could use some thoughts

Tom Wesenberg · 03-26-2015, 10:08 AM

My first thought was your wheels got switched. I guess it pays to make some little mark on the inner tube area of the rim and take a picture of it, so you know you get your own wheels back. You can spend many hours per wheel to cover over pits in the rim and spokes. I'd look for better wheels and paint them yourself.

Near this area it is $40 to blast and powdercoat each wheel.

03-26-2015, 10:08 AM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: powder coating - did not turn out well, could use some thoughts My first thought was your wheels got switched. I guess it pays to make some little mark on the inner tube area of the rim and take a picture of it, so you know you get your own wheels back. You can spend many hours per wheel to cover over pits in the rim and spokes. I'd look for better wheels and paint them yourself. Near this area it is $40 to blast and powdercoat each wheel.