The Ford Barn - View Single Post

1931 flamingo · 03-07-2015, 09:04 AM

Try a 50/50 mix of acetone and ATF. Build a "dam" around each stud with putty and fill with the mixture and let sit or apply with a small brush.
Paul in CT

03-07-2015, 09:04 AM	#7
1931 flamingo Senior Member Join Date: May 2010 Location: new britain,ct 06052 Posts: 9,428	Re: model a original head Try a 50/50 mix of acetone and ATF. Build a "dam" around each stud with putty and fill with the mixture and let sit or apply with a small brush. Paul in CT