Re: Timing = heating?
Wow, you guys are fast.
I do have the btm and is set to 1.5 per J. Abbin. Joe is fantastic to deal and work with btw.
My pulley has been marked with tdc and tic marks for timing.
I have tried a dial-back light before and it was all over the place. I was told that they don’t work well with MSD electronic ign. I have a regular light and will try that.
When you say check for timing coming in too late are you just saying to check for max by 3000 rpm? Yes, I am learning about pink, brown, gray, purple springs. LOL
I will start at 4 after at idle and go for 24 total or on the 20 mark on the pulley.
I will put together a post about the heads off soon.
And, thank you so much for your advice and patience with us slow learners.
Fourdy
|