The Ford Barn - View Single Post

PeteVS · 05-07-2010, 08:46 AM

I've got a nice 3.54 ring and pinion set. Only trouble is the pinion spline has been seriously hammered. Should it be possible to build up weld on the worn faces of the spline and remachine it? Thanks!

05-07-2010, 08:46 AM	#1
PeteVS Senior Member Join Date: May 2010 Location: FP, NJ Posts: 2,828	Repairing splines? I've got a nice 3.54 ring and pinion set. Only trouble is the pinion spline has been seriously hammered. Should it be possible to build up weld on the worn faces of the spline and remachine it? Thanks!