The Ford Barn - View Single Post

Tom Wesenberg · 01-13-2015, 03:43 AM

I would remove the shift tower and feel the fit of the 2-3 gear to the shaft. Try to rock it on the shaft. If you can feel any twisting movement, I'd call it too loose.

01-13-2015, 03:43 AM	#16
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Slipping out of 3 rd on compression I would remove the shift tower and feel the fit of the 2-3 gear to the shaft. Try to rock it on the shaft. If you can feel any twisting movement, I'd call it too loose.