The Ford Barn - View Single Post

pat in Santa Cruz · 01-11-2015, 10:34 PM

was the main drive gear replaced? That pilot shaft that fits into the flywheel pilot bearing must not be worn more than .002 or it can slip out on compression. It should be .668 diameter.

01-11-2015, 10:34 PM	#3
pat in Santa Cruz Senior Member Join Date: May 2010 Location: santa cruz, calif Posts: 2,012	Re: Slipping out of 3 rd on compression was the main drive gear replaced? That pilot shaft that fits into the flywheel pilot bearing must not be worn more than .002 or it can slip out on compression. It should be .668 diameter.