The Ford Barn - View Single Post

Tom Cavallaro · 01-11-2015, 06:05 PM

It starts, it just turns over for 30 secs. Before it starts, then stalls. I start it again, another 30 secs. Then starts. Don't know how far, because I did a complete revolution on the cam to make sure all slack is out. Also had to clip the light to the arm on the points to get the light to work properly, because when I cliped it on the coil, the light was always on, and only got brighter when the points opened.
Tom

01-11-2015, 06:05 PM	#4
Tom Cavallaro Senior Member Join Date: Nov 2011 Location: Barrington, NJ Posts: 280	Re: Les Andrews way of timing... It starts, it just turns over for 30 secs. Before it starts, then stalls. I start it again, another 30 secs. Then starts. Don't know how far, because I did a complete revolution on the cam to make sure all slack is out. Also had to clip the light to the arm on the points to get the light to work properly, because when I cliped it on the coil, the light was always on, and only got brighter when the points opened. Tom __________________ I work very hard to avoid all and any mistakes. I thought I made a mistake once, but I was wrong.