The Ford Barn - View Single Post

TJ · 01-08-2015, 10:07 AM

I'm not sure you can find a dual MC with the 1 1/16 bore. They do make an adapter that goes from 3 bolt to 2 bolt for the 39 pedal assemble ,so you can use the dual MC. It moves the MC back about 3/4". There are adapters that will screw into the MC that will allow the 1/4" lines. Some dual cylinders have residual valves and some do not. It would take some research and a parts house with some knowledgeable people willing to help to find a cylinder with the correct specifications to use with the adapter.

01-08-2015, 10:07 AM	#2
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,773	Re: Master cylinder conversion I'm not sure you can find a dual MC with the 1 1/16 bore. They do make an adapter that goes from 3 bolt to 2 bolt for the 39 pedal assemble ,so you can use the dual MC. It moves the MC back about 3/4". There are adapters that will screw into the MC that will allow the 1/4" lines. Some dual cylinders have residual valves and some do not. It would take some research and a parts house with some knowledgeable people willing to help to find a cylinder with the correct specifications to use with the adapter.