The Ford Barn - View Single Post

deuce_roadster · 01-03-2015, 08:01 PM

The correct small air lines I have seen have very small tapered ends that you need to solder on AFTER slipping the nut over the end of the line.

01-03-2015, 08:01 PM	#8
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 4,043	Re: Gas Gauge Thread The correct small air lines I have seen have very small tapered ends that you need to solder on AFTER slipping the nut over the end of the line.