Quote:
Originally Posted by charles in east texas
That wire going across releases the latch on the passenger side. Before I installed the seat, I would set in it and try the release lever and make sure everything is working properly, moving back and forth, etc. Charles
|
I agree, but my concern is there looks like there may be a spring attached to it in the center. There is a stud sticking out from the frame with an eyelet and the wire has a matching eyelet. The wire has a somewhat of a bow towards the stud eyelet. It just appears as I am missing a spring or something. This car was a basket case when I got it 3 years ago. I bought the books, but nothing on the seat construction so far.
Thanks