Go Back   The Ford Barn > Search Forums

Sponsored Links (Register now to hide all advertisements)

Showing results 1 to 25 of 500
Search took 0.06 seconds.
Search: Posts Made By: russcc
Forum: Early V8 (1932-53) 09-24-2020, 06:27 PM
Replies: 20
Views: 577
Posted By russcc
Re: 1940 Front Wheel Cylinders

The holes in the shoes & brass eccentric cams and anchor bolts at the bottom of the shoes adjust the position of the shoes on '40 brakes. Suggest you see if you can find Rumble seat's post on brakes....
Forum: Early V8 (1932-53) 09-24-2020, 06:07 PM
Replies: 26
Views: 669
Posted By russcc
Re: new engine start-up problems

I am also just about to fire off the newly re-built 59L, but am using a stock manifold, a known 94 carb that Charlie NY rebuilt, along with a 21A dist he did also. I don't want any extra issues to...
Forum: Early V8 (1932-53) 09-23-2020, 07:34 AM
Replies: 9
Views: 196
Posted By russcc
Oil pressure with remote oil fllter

I realize this topic has seen a lot of recent action, but I can't seem to find an answer to my specific question. The 59L is ready to fire up, I drilled the block 3/8" NPT and plumbed for 95% oil...
Forum: Early V8 (1932-53) 09-22-2020, 07:53 PM
Replies: 20
Views: 577
Posted By russcc
Re: 1940 Front Wheel Cylinders

Suggest you reassemble the wheel cylinders with Mckay brake cylinder lube, available on Ebay, $10, incl shipping.
Forum: Late V8 (1954+) 09-19-2020, 06:13 PM
Replies: 11
Views: 403
Posted By russcc
Need help identifying these wheel covers

I think the Ford wheel covers may be from the late 50's to 60's but I am not sure. Anyone able to pinpoint the year and model these are from. Thank you.
Forum: Early V8 (1932-53) 09-19-2020, 06:10 PM
Replies: 4
Views: 219
Posted By russcc
Re: '40 Ford visors

Thank you for the tip on pulling the visor off the shaft. Not something I thought of.
Forum: Early V8 (1932-53) 09-19-2020, 08:32 AM
Replies: 4
Views: 219
Posted By russcc
'40 Ford visors

The driver side visor in the '40 coupe is very stiff, probably hasn't been moved for years. It is hard to flip it up & down. I tried moving it back and forth a number of times, but it's still stiff....
Forum: Early V8 (1932-53) 09-18-2020, 10:09 AM
Replies: 4
Views: 236
Posted By russcc
Help with an O1A part number

I have the green bible, but I am pretty sure the body part #s are not in there.

What I was looking for is the O1A- part number for the interior oval head slotted self sheet metal screws like the...
Forum: Early V8 (1932-53) 09-13-2020, 05:48 AM
Replies: 1
Views: 153
Posted By russcc
Seat cover for coupe

Does anyone still make a simple slip on seat cover that would wok on a '40 coupe split back seat. The seat has been redone with LB leather, and I looking for some type of protective cover to use when...
Forum: Early V8 (1932-53) 09-13-2020, 05:45 AM
Replies: 35
Views: 1,514
Posted By russcc
Re: Cleaning an early aluminum intake

For the pessimist's information the marine hull cleaner didn't touch the Ford Aluminum manifold. Maybe some type of aluminum but not a Ford casting in my experience.
Forum: Early V8 (1932-53) 09-12-2020, 07:05 PM
Replies: 26
Views: 809
Posted By russcc
Re: Remote oil filter

Yea, I have the bushings, but I hate them, just another piece of junk, I already have most of the male elbows 3/8 SAE 45 flare to 3/18 NPT. But the 24762 has vertical in & outs with 3/4-16 thread so...
Forum: Early V8 (1932-53) 09-12-2020, 06:53 PM
Replies: 17
Views: 613
Posted By russcc
Re: Remote oil filter. Help!

Hi Aaron

Is OUT OF STOCK BOB's kit similar to the original Ford type stock bypass system ?. If so, there are plenty of those original systems available. If that's what you are looking for you...
Forum: Early V8 (1932-53) 09-11-2020, 06:50 PM
Replies: 26
Views: 809
Posted By russcc
Re: Remote oil filter

Thanks to all of you for your help. I went through the WIX remote conversion options list provided by Ronnie, and does looks like the 24762 with a 3/4-16 thread he suggested will do it. It has...
Forum: Early V8 (1932-53) 09-11-2020, 06:27 PM
Replies: 35
Views: 1,514
Posted By russcc
Re: Cleaning an early aluminum intake

The Marine hull cleaners I used were On & Off marine hull cleaners by Marykate ?, and Star Brite marine bottom & hull cleaner. The Star Brite seemed stronger than the On & Off, nut may heave been...
Forum: Early V8 (1932-53) 09-11-2020, 06:08 PM
Replies: 11
Views: 702
Posted By russcc
Re: old school flathead...

Thanks for the heads up. I think Rick is Walt's son in law. He helps out Walt in the shop. Walt used to run that at Winterport ME.
Forum: Early V8 (1932-53) 09-10-2020, 07:19 PM
Replies: 9
Views: 1,126
Posted By russcc
Re: Bubba's Ignition

As you probably know, Jim handed over the Chevy dist. conversions to Charlie NY. Charlie just did a 21A for me, as I felt Jim was backed up with the health issues. I wish him well.
Forum: Early V8 (1932-53) 09-10-2020, 06:48 PM
Replies: 26
Views: 809
Posted By russcc
Re: Remote oil filter

Thanks again. I found the WIX 1085 filter I use on the Jeep 4.0 has 3/4-16 thread. So I am on the right track as that size is not too large. Now to check the footprint.
Forum: Early V8 (1932-53) 09-10-2020, 06:42 PM
Replies: 35
Views: 1,514
Posted By russcc
Re: Cleaning an early aluminum intake

Sorry about the photos, slipped my mind. What I do like about this nasty process is, it produces and almost ready to use part, and in my case, the aluminum came out with a business like magnesium...
Forum: Early V8 (1932-53) 09-09-2020, 06:45 PM
Replies: 35
Views: 1,514
Posted By russcc
Re: Cleaning an early aluminum intake

Latest update. If you decide to use Marine Grade Hull cleaner to clean an old aluminum manifold, look out ! In the 2nd experiment I cleaned the oil sludge off the bottom of another manifold. This...
Forum: Early V8 (1932-53) 09-09-2020, 06:25 PM
Replies: 26
Views: 809
Posted By russcc
Re: Remote oil filter

Thank you all again. I have not bought a remote oil filter base yet. Because I have used WIx filters for years, that was the remote base I was focused on. If it, or some of the similar WIX model...
Forum: Early V8 (1932-53) 09-09-2020, 09:20 AM
Replies: 26
Views: 809
Posted By russcc
Re: Remote oil filter

Thank you all for the education. I converted the 59L to a 95% filtration system on where it comes from the pump through the main to the outlet side on the bell housing, and returns to the inlet side...
Forum: Early V8 (1932-53) 09-08-2020, 06:05 PM
Replies: 21
Views: 818
Posted By russcc
Re: 42-47 pickup bed

Thank you JSerry. That is the company in MO. Nice folks to work with. Very knowledgeable woman in customer service.
Forum: Early V8 (1932-53) 09-08-2020, 06:00 PM
Replies: 26
Views: 809
Posted By russcc
Remote oil filter

Looks like the WIX 24770 will do the trick, but is there a more compact filter than the WIX 51515, Fram PH 8, or Baldwin B50 ? Thank you Fordbaners.
Forum: Early V8 (1932-53) 09-08-2020, 05:57 PM
Replies: 35
Views: 1,514
Posted By russcc
Re: Cleaning an early aluminum intake

Here is look at the underside of a trial manifold after cleaning with marine bottom cleaner, (acid base). Heavily coated with the cleaner, let it set a couple hrs, and washed it off with fresh water....
Forum: Early V8 (1932-53) 09-08-2020, 11:56 AM
Replies: 23
Views: 489
Posted By russcc
Re: New Master cylinder weeping in back around piston

I got the Mckay from ebay, JSerry post. It was recommended by Aarongriffey here on the barn. Take a good look at the MC bore, it may have some residue in it you probably can clean off with acetone...
Showing results 1 to 25 of 500

 
Forum Jump
Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:21 AM.