Go Back   The Ford Barn > Search Forums

Sponsored Links (Register now to hide all advertisements)

Showing results 1 to 25 of 500
Search took 0.05 seconds.
Search: Posts Made By: duke36
Forum: Model A (1928-31) Yesterday, 12:16 PM
Replies: 11
Views: 493
Posted By duke36
Re: Fs ignitions

I had the 12 v FS zipper which was good except on hills with a H.C. head.; it wouldn't retard enough to prevent knocking. Some owners modify the internals to be able to rotate the dizzy assembly or...
Forum: Model A (1928-31) 01-20-2021, 12:01 PM
Replies: 15
Views: 668
Posted By duke36
Re: Aristocrat accessory dash

For some reason that number isn't found in the search function
Forum: Model A (1928-31) 01-16-2021, 06:33 PM
Replies: 24
Views: 829
Posted By duke36
Re: Benefits of a thermostat?

It just came to mind that the factory recommended oil change was 500 miles, so sludge build up of the period (non deterg) oils would possibly be lessened if the A's ran cold when produced.
Forum: Model A (1928-31) 01-15-2021, 11:17 PM
Replies: 24
Views: 829
Posted By duke36
Re: Benefits of a thermostat?

See other threads, many opinions. The Model A has no bypass system like later and modern cars do to circulate the coolant until the stat opens. Hot spots can potentially occur with stagnant flow...
Forum: Model A (1928-31) 01-10-2021, 06:59 PM
Replies: 23
Views: 1,808
Posted By duke36
Re: Need Picture of Cutaway Water Jacket

I'd like to see this also.
Forum: Model A (1928-31) 01-10-2021, 06:45 PM
Replies: 21
Views: 988
Posted By duke36
Re: Reducing Steering Free Play

The steering box freeplay with new box components can get very close to 1/4 " at the wheel at the center position, equal lash at both extremes and with wood ruff key pointing towards fill hole, etc....
Forum: Model A (1928-31) 01-08-2021, 06:18 PM
Replies: 15
Views: 823
Posted By duke36
Re: Engine heat in cold weather

So, related to the other threads in conjunction to a stat and faster warm up:
if the 3/8" tube option is employed to the block rear, which way is the coolant flowing in that tube when the stat is...
Forum: Model A (1928-31) 01-08-2021, 12:16 PM
Replies: 23
Views: 1,808
Posted By duke36
Re: Need Picture of Cutaway Water Jacket

So if the 3/8" tube option is employed to the block rear, which way is the coolant flowing in that tube when the stat is fully open? When the stat is closed, it does appear from the Ford cooling...
Forum: Model A (1928-31) 01-05-2021, 12:35 PM
Replies: 57
Views: 12,202
Posted By duke36
Re: Adjustable Drag Link

Have done the one using a Moog adjustable sleeve using the dies as posted on an old extra drag link. Cut enough threads but don't cut out too much of the drag to get the most support from the sleeve....
Forum: Model-A 01-04-2021, 12:45 PM
Replies: 0
Views: 358
Posted By duke36
Model A winterfront (1931)

Wanted winterfront to fit 1931 radiator and later shell with painted inserts.
Prefer one with cable adjustable louvers.
PM please.
Forum: Model A (1928-31) 01-04-2021, 12:34 PM
Replies: 28
Views: 1,058
Posted By duke36
Re: 2021 plans for your Model A

WWirz, you may want to read up on changing to modern points and condenser.. I found no benefit and the points can be more difficult to adjust. Check discussions about relocated (purchase short proof...
Forum: Model A (1928-31) 01-02-2021, 12:14 PM
Replies: 11
Views: 703
Posted By duke36
Re: (Yet Another) Electrical Question

I always install quality battery cut off switches (Cole Hersey 2484 or the longer shank version) and get in the habit off shutting them off when a car is not running, and / or especially during...
Forum: Model A (1928-31) 01-01-2021, 01:58 PM
Replies: 15
Views: 823
Posted By duke36
Re: Engine heat in cold weather

Some posts have noted cooler running engines with H. Comp heads. Blocking the radiator fins may be a more controllable way to measure or gauge the temps rather than a stat which some say can create...
Forum: Model A (1928-31) 01-01-2021, 01:52 PM
Replies: 6
Views: 469
Posted By duke36
Re: Modern Grease For Steering Gears

Timely thread. Just rebuilt 2 tooth box, which was leaking with JD Corn Head grease (liquified and component separation), and resealed the bottom light switch bolt thru holes, etc. I'm now using ...
Forum: Model A (1928-31) 12-15-2020, 11:35 AM
Replies: 22
Views: 1,983
Posted By duke36
Re: F-100 steering box conversion

The F100 boxes use the roller sector shaft like mid 30's -on vehicles. Easier to steer but sometimes difficult to adjust out the free play. Btw, a shortened pitman arm on a stock gear most often...
Forum: Model A (1928-31) 12-15-2020, 10:40 AM
Replies: 15
Views: 922
Posted By duke36
Re: Paint question

Just an alert that there have been in the past 2 versions of this color scheme, one with greenish hues and the other with brown/beige overtones. The latter is considered correct per the MAFCA/ MARC...
Forum: Model A (1928-31) 12-14-2020, 11:47 AM
Replies: 6
Views: 992
Posted By duke36
Re: Late 31 oil pump shield?

We found a repo shield in a spare parts box (not sure of the vendor) that measures 3 1/4" from the bottom to the top mount flange plate. The photo is slightly distorted. How does this compare to an...
Forum: Model A (1928-31) 12-14-2020, 11:44 AM
Replies: 12
Views: 1,188
Posted By duke36
Re: 1930 Ford Model A Fordor

You may want to try the Model A parts books or the The Ford Model A book by De Angeles Henry for photos of the wood,brackets etc. Also, Brent Terry Restorations for photos of the wood (see post 8)...
Forum: Model A (1928-31) 12-13-2020, 06:45 PM
Replies: 6
Views: 992
Posted By duke36
Re: Late 31 oil pump shield?

Not sure what this is in reference to. Having examined a repop shield, it looks like it can trimmed at the bottom edge but not sure there would be adverse oil pumping or volume issues with the non...
Forum: Model A (1928-31) 12-13-2020, 10:58 AM
Replies: 25
Views: 1,043
Posted By duke36
Re: Coil or condenser over heat

Should carry a spare coil and condenser in the car (as you stated?). Also review other threads about coil and condenser type and quality. Many new oil filled coils are not reliable and may need the...
Forum: Model A (1928-31) 12-12-2020, 05:27 PM
Replies: 6
Views: 992
Posted By duke36
Re: Late 31 oil pump shield?

Interesting question. Anyone done the trimming successfully ? Would the extra 1/8" compromise flow because the dipper tray is not lowered? FORD must have had some reason not to refit prior (higher)...
Forum: Model A (1928-31) 12-09-2020, 11:03 AM
Replies: 32
Views: 2,286
Posted By duke36
Forum: Model-A 12-07-2020, 11:19 AM
Replies: 1
Views: 277
Posted By duke36
Forum: Model A (1928-31) 11-30-2020, 11:33 AM
Replies: 23
Views: 1,333
Posted By duke36
Re: Rear Spring Removal

Try to wrap or work some chain around the leaves or use sturdy clamps for extra insurance.
Forum: Model-A 11-29-2020, 06:38 PM
Replies: 1
Views: 277
Posted By duke36
Headliner broadcloth material, 1 yard.

Need only 1 yd of cotton or wool taupe/ tan broadcloth (side panels or headliner) to cover '31 interior sun visors. Existing material has a slight pinkish hue compared to that in kits offered by...
Showing results 1 to 25 of 500

 
Forum Jump
Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:27 AM.