Go Back   The Ford Barn > Search Forums

Sponsored Links (Register now to hide all advertisements)

Showing results 1 to 25 of 357
Search took 0.04 seconds.
Search: Posts Made By: Dick M
Forum: Model A (1928-31) 09-29-2020, 02:24 PM
Replies: 23
Views: 694
Posted By Dick M
Re: Brake Conversion? Or not.

I am perfectly happy with mechanical brakes on my 31 coupe.

It will cost you in the $2,000 neighborhood to convert to juice brakes.

You will need some good advice and a good vendor to help...
Forum: Model A (1928-31) 09-26-2020, 01:52 PM
Replies: 13
Views: 789
Posted By Dick M
Re: *** Annual MAFCA Voting for Directors ***

Jim has two votes from my family. Straight shooter and a good guy. He will serve the membership well. Go Jim Go!!!!
Forum: Model A (1928-31) 09-19-2020, 02:18 PM
Replies: 36
Views: 1,708
Posted By Dick M
Re: Ignition timing question

If you are asking what you will see with a regular timing light, you will probably see nothing. If you are asking what you will see with a grounded test light attached to the closed point arm, with...
Forum: Model A (1928-31) 09-17-2020, 12:02 PM
Replies: 16
Views: 672
Posted By Dick M
Re: PCV valve good idea?

I only put in 4 quarts when changing oil. About 1/2 quart stays in the engine between the valve galley and the dipper tray. That gives me 4 1/2 quarts in the engine. This lowers the oil level in...
Forum: Model A (1928-31) 09-09-2020, 03:21 PM
Replies: 24
Views: 1,059
Posted By Dick M
Re: Fumbled a piston

I agree the piston will probably function as a piston. However, I would be concerned about the weight of the piston. Generally pistons are weighed in grams, and come as a matched set; that is they...
Forum: Model A (1928-31) 08-28-2020, 02:12 PM
Replies: 21
Views: 1,141
Posted By Dick M
Re: Engine sits too high for hand crank engagement

Do you have float-a-motor mounts in the rear?? if so, the rubber doughnuts have softened and dropped the rear of the engine. That is a simple fix. Just buy new doughnuts for the rear...
Forum: Model A (1928-31) 08-12-2020, 10:50 AM
Replies: 14
Views: 603
Posted By Dick M
Re: Clutch pressure plate New or Reconditioned?

Bert's Model A Center has a pressure plate rebuilder. He does a great job. The fingers are preset so all you have to do is bolt it to the flywheel. Steve at Bert's told me he has not had a...
Forum: Model A (1928-31) 07-19-2020, 01:19 PM
Replies: 3
Views: 313
Posted By Dick M
Re: Clutch / pressure plate

Bert's in Colorado has a pressure plate rebuilder. The rebuilder goes through the pressure plate checking everything. He replaces any worn parts. He only rebuilds stock Model A pressure plates. ...
Forum: Model A (1928-31) 07-19-2020, 01:09 PM
Replies: 5
Views: 431
Posted By Dick M
Re: New Tires- B F Goodrich or Excelsior Tires

My first 2 sets of tires were Firestones. I went with the BFGs about 8K miles ago. I think they are more stable then the Firestones. The BFGs go straight down the road with little or no wandering....
Forum: Model A (1928-31) 07-08-2020, 07:03 PM
Replies: 14
Views: 860
Posted By Dick M
Re: Rearend Leak

Same reply as #2 except I used JB Weld. Ten years later and no leak....
Forum: Model A (1928-31) 07-05-2020, 12:16 PM
Replies: 29
Views: 1,299
Posted By Dick M
Re: Radiator Overheating

I have been to your movie a couple of times. Old radiators are not your friend. They create an overheated engine and driver.

After much grief, I purchased a 4 row radiator from Bert's Model A...
Forum: Model A (1928-31) 07-03-2020, 09:00 PM
Replies: 116
Views: 94,077
Posted By Dick M
Re: Manners... A new rule...

Ryan,
I have had my A for 20 years. I have been on this forum for 10 years. I so appreciate most of the folks on Fordbarn. Many times some one answered my questions and helped me solve a problem....
Forum: Model A (1928-31) 07-02-2020, 04:21 PM
Replies: 31
Views: 1,770
Posted By Dick M
Re: 600w oil

I have been using a 680 oil (CHEVRON OR MOBIL) in my steering box, transmission, and differential for many years. I find it to be outstanding........
Forum: Model A (1928-31) 06-27-2020, 11:55 AM
Replies: 11
Views: 860
Posted By Dick M
Re: Firewall Insulation

I have the Quiet Ride firewall insulator on my Coupe. It is an exact mold of the inside of the firewall. It uses a few screws to attach. It also comes with an adhesive if you want to use it. I...
Forum: Model A (1928-31) 06-12-2020, 02:14 PM
Replies: 16
Views: 1,538
Posted By Dick M
Re: More kudos to Bert's Model A Center

A few years ago I was doing a valve job and replacing my valve guides. I needed the valve guide removal tool to do the job. I did not have one so I called Bert's and talked to Steve to place the...
Forum: Model A (1928-31) 06-09-2020, 10:58 AM
Replies: 8
Views: 585
Posted By Dick M
Re: Fan Belt Removal

One thing you can do is loosen the nut on the yoke so that is is even with the end of the threads. You can then jack up the engine enough to remove the belt.
Forum: Model A (1928-31) 05-19-2020, 01:37 PM
Replies: 21
Views: 975
Posted By Dick M
Re: first time looking at a 30 Model A

Contact Paul Marjerick in Montgomery, Alabama at 334-269-1309. He is the closest Model A Ford Club of America member to you. You will find folks with Model A knowledge at this club.
Forum: Model A (1928-31) 04-24-2020, 02:05 PM
Replies: 51
Views: 2,350
Posted By Dick M
Re: To rebuild or not to rebuild - that is the question.

$5,000 for the car and another $10,000 for restoration equals a $15,000 Tudor. I might offer that you should be able to find a really nice and mechanically sound Tudor with an overdrive for $15,000...
Forum: Model A (1928-31) 04-19-2020, 11:13 AM
Replies: 19
Views: 1,303
Posted By Dick M
Re: 30-31 instrument panel

Here is a fix if your bottom screws are too short. They use the same screw size that the outside door handle screws. The outside door handle screws are longer than the dash screws..
Forum: Model A (1928-31) 04-09-2020, 10:52 AM
Replies: 23
Views: 1,130
Posted By Dick M
Re: 1930 82b

I had the same problem. It turns out the carb was the problem. I had it rebuilt by Bert's in Denver. Problem solved. The jets needed to be replaced as they were the wrong size.....
Forum: Model A (1928-31) 03-31-2020, 11:04 AM
Replies: 21
Views: 1,076
Posted By Dick M
Re: Cam spring and button

I once saw the same problem. Turns out that the line bore of the crank was slightly off center towards the cam. It made for a very tight fit between the crank and cam gears. I agree you should...
Forum: Model A (1928-31) 03-22-2020, 03:13 PM
Replies: 10
Views: 816
Posted By Dick M
Re: Need Source For Rebuilt Shocks

RE: Post #2---So sorry! My old brain does not work as well as it used to. It is definitely area code 330 NOT 303.....
Forum: Model A (1928-31) 03-21-2020, 11:42 AM
Replies: 10
Views: 816
Posted By Dick M
Re: Need Source For Rebuilt Shocks

Call John Holland at 303-483-3896 if you are looking for a shock re-builder. He does excellent work and is quite reasonable. I have had his rebuilt shocks on my A for 10 years without any problems.
Forum: Model A (1928-31) 03-20-2020, 10:40 AM
Replies: 15
Views: 847
Posted By Dick M
Re: tie rod

If your toe-in is within specs and your steering box is not sloppy, continue on and replace the springs and steel cups in the tie-rod and drag link. This should solve your problem.
Forum: Model A (1928-31) 03-17-2020, 11:55 AM
Replies: 4
Views: 553
Posted By Dick M
Re: 31 Ford 5window

Here you go! You can increase the zoom to around 250% to get a clear picture.
Showing results 1 to 25 of 357

 
Forum Jump
Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:57 PM.