The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Wiper motor identification (https://www.fordbarn.com/forum/showthread.php?t=94929)

Fibber Mcgee 01-18-2013 09:34 AM

Wiper motor identification
 

I recently purchased a wiper motor off of ebay for five dollars with free shipping . I thought if nothing else I could take it apart to see how the work. The number on it is CSM 110 1. Does anyone know what that fits?

Bob C 01-18-2013 12:51 PM

Re: Wiper motor identification
 

Found this on Ebay http://www.ebay.com/itm/Ford-1949-63...p2047675.l2557
Trico Vacuum Wiper Motor
Ford
Parcel Delivery, 8J-85, 1949, 1950, HJ-104 1951, H2J-122 1953, P350-104", 122", P400-137", 122", P-500-130", 122", 1957, 1958, 1959, 1960, 1961
NOS New OEM Left Side Trico Vacuum Wiper Motor, CSM-110-1. This is a new Trico vacuum motor that has been on the shelf for a long time and should be taken apart and greased to make sure it runs great for a long time. We have a large selection of Trico motors and parts see our Ebay Store for other listings. Bid now on this original Trico Vacuum Motor.

rock60joe 09-10-2017 01:11 PM

Re: Wiper motor identification
 

Quote:

Originally Posted by Bob C (Post 573934)
Found this on Ebay http://www.ebay.com/itm/Ford-1949-63...p2047675.l2557
Trico Vacuum Wiper Motor
Ford
Parcel Delivery, 8J-85, 1949, 1950, HJ-104 1951, H2J-122 1953, P350-104", 122", P400-137", 122", P-500-130", 122", 1957, 1958, 1959, 1960, 1961
NOS New OEM Left Side Trico Vacuum Wiper Motor, CSM-110-1. This is a new Trico vacuum motor that has been on the shelf for a long time and should be taken apart and greased to make sure it runs great for a long time. We have a large selection of Trico motors and parts see our Ebay Store for other listings. Bid now on this original Trico Vacuum Motor.

I have a 1950 ford, F1....I hooked up the vacuum line and it turns the driver side.
I have no idea how to hook up the rider side as the bar has slots and fall off as it turns.
How the heck do I secure this bar to work??? do you have any sketch I can use...Then I can test it and see if I need a new motor?
Also...the motor has 2 vacuum fittings....I used one, the other???

rock60joe 09-10-2017 01:20 PM

Re: Wiper motor identification
 

I have a 1950 ford, F1....I hooked up the vacuum line and it turns the driver side.
I have no idea how to hook up the rider side as the bar has slots and fall off as it turns.
How the heck do I secure this bar to work??? do you have any sketch I can use...Then I can test it and see if I need a new motor?
Also...the motor has 2 vacuum fittings....I used one, the other???


All times are GMT -5. The time now is 08:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.