A-36 Ford Spindle Hydraulic Brake King Pins
 

This is a heads up post on new products.

I noticed both on the HAMB and Ford barn a number of posts regarding hydraulic brake conversions on stock mechanical brake spindle cars and the ugly issue of the stock mechanical actuator cup on top of the king pin. Years ago I made these king pin kits up, since there seems to be more interest I thought I would make up another batch.

These king pins are made from NOS or NORS parts and include 2 new king pins, 4 new spindle bushings , 2 correct upper support bearings and 2 new king pin locks. They fit 1928 to 1936 Ford passenger car spindles and mount the support bearing in the correct position with clearance for both stock 1939-48 hydraulic backing plates and the new reproduction Lincoln style units. Retail $89.00pr.