The Ford Barn - 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model-A (https://www.fordbarn.com/forum/forumdisplay.php?f=8)

- - 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe (https://www.fordbarn.com/forum/showthread.php?t=83215)

1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

City: Bellingham

Its time to clean out the garage and sell a bunch of extra sheet metal, some in pretty good shape to some in decent shape, but it may take a little work. I would gladly trade for good condition Model A banger/speed parts. Looking for a double intake, downdraft carbs, high compression head, lakes headers, etc. Please let me know what you have. Also interested in shock linkages too.

It is all for 30-31 bodies, primarily coupe, sport coupe and roadsters. All prices are excluding shipping.

Running Boards (Gray)-these are in fantastic shape. No dents, dings or rust at all! Masking tape is over the chrome still to protect it from scuffs and scrapes. Has the splash aprons welded on! Nice US made part!-$275

Running Boards (red and black)-Left side is in fantastic shape, the right side needs the hole patched however. Easy fix though, no trim or mat however.-$225

Decklid-needs some work and patching up. Overall solid, just needs a skin patch on the outside and maybe some patching inside for the handle.-$250

Rumble seat riser pan, needs to be sandblasted but otherwise in great shape, no rust through, just surface rust.-$85

Sport coupe quarter panels. These are in good shape, no rust through, however the left side did sustain two gunshot wounds...easy to patch up. I may keep these to use for patching up my roadster. In great shape.

Reinforcement for the panel under the decklid/trunk-offer?

Rear cross sill (missing the inner structure)-Offers?

Panel above the rumble seat with latch-offers?

Rear fenders-$30 each

Front fenders without tire wells, all need some sort of work-$50 each

Front fender with tire-driver's side, really pretty decent shape!-$300

Front fender with wheel well passenger side, OK shape, will need some patching-$200

Feel free to PM me if you have questions or want additional photos. Prices are OBO.

Thanks!

Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

Quote:

Sport coupe quarter panels. These are in good shape, no rust through, however the left side did sustain two gunshot wounds...easy to patch up. I may keep these to use for patching up my roadster.-$600 for the pair. In great shape.

FYI, They won't fit/patch a roadster in any way.

Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

Bump to the top, lots of interest and a few pendings.
Thanks!

Re: 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

how much for the rear quarter panels. I know you said you might use them but if you decide not to, i could.