31 Vickie window channels
 

City: gladstone

State: oregon

WANTED ;Door window channels for a 1931 victoria . not argentin
phone Bill @ 503 - 657-1890 I am posting for a friend. this is his phone number.

Re: 31 Vickie window channels
 

are you talking the steel window channel in the lower part of the door or the felt channel

Re: 31 Vickie window channels
 

I am talking about the steel window channels. I should have called them the glass channels.

Re: 31 Vickie window channels
 

the front and rear window channels are the same as the SW front doors. if you are looking for the lower window channel they have rights and lefts NO ONE makes a repo that is worth 2 cents, I buy the 32 tudor repo`s cut the slide off and through them away, shorten the channel and use the channel, than I weld original slides on them, I do have some good originals and some for patterns, if you need some pictures or measurements let me know. John [email protected]

Re: 31 Vickie window channels
 

J.W. Thanks for helping Bill out with the parts he needed. Jake T.:)