1947 ford sedan
 

City: san antonio

State: texas

Hood hinges;cowl vent lid with screen;cowl vent handle assembly;emergency brake handle assembly;dash board complete with speedometer;clock;all gauges;dont know if clock works;curved rear glass window;trunk lid arms;hood;4 doors;front bumper;windshield wiper tower assembly right/left with bezels and outside wiper arms;trunk latch mechanism;trunk handle with license plate light;ALL ORIGINAL FORD PARTS;

Re: 1947 ford sedan
 

Bro in law may be interested in some parts ,non hamb member so he needs a phone #

Re: 1947 ford sedan
 

airtex6523,
What condition is the trunk handle with lite in, does the key cap work stay up and cover the hole, possible any pic's and what kind of price.

Re: 1947 ford sedan
 

good condition with lp glass;key cap does stay open fine;do you want the inside trunk locking mechanism also?

Re: 1947 ford sedan
 

airtex6523, my question was not does the key cap stay open, but does it still have the spring on it and stay closed when back in position, and I would not need the trunk locking mechanism. I also could use one running board stainless steel trim piece that goes along the outside of the running board, doesn't need to be a 100% perfect, but not beat completely either. Would like to know pricing and possibly pic's so we can see what we are paying for.
thanks.

Re: 1947 ford sedan
 

pm sent

Re: 1947 ford sedan
 

FYI: "Hey fellas... Here are some preliminary rules for us all to abide by. I'm sure these will change in time, but they will at least get us going.

1. All ads must have a price.

2. Ads may only be "bumped to the top" once every three days.

3. This is not a discussion forum. Please limit replies to ads to constructive questions only."

Re: 1947 ford sedan
 

How much do you want for dash, ash trays (2 )and glove box If instruments are red letter I will buy them also.
Jim
415-299-9220
[email protected]

Re: 1947 ford sedan
 

i need the e-brake cable that goes from the e-brake assembly, it has a small knob on it to attach to the e-brake handle assembly. please let me know if you have it or if you can email me a pic or info? [email protected].

thanks,
george
s.dak

Re: 1947 ford sedan
 

I am looking for dash, glove box door, ash trays and any Red letter instruments and clock. Pay top dollar for excellent parts. Since I don't understand this site here is my contact info Jim
phone 415-299-9220
[email protected]