info on 35 ford pu jack
 

hi everyone im looking for pictures of a 1935 ford pickup mechanical jack

Re: info on 35 ford pu jack
 

btt

Re: info on 35 ford pu jack
 

Send this guy an email... He is Lindley Stacy the early ford tool Guru..

LINDLEY STACEY [[email protected]]

Re: info on 35 ford pu jack
 

i emailed him and so far no reply, looking for a mechanal jack picture for a 1935 ford pickup i have around 150 old jacks and trying to ID them. been collecting early ford and automotive tools and jacks for most of the last 40 or so years, just trying to get an idea of what exactly i have

Re: info on 35 ford pu jack
 

The 35 pick up jacks are the same as the passenger car jacks and are pictured on page 147 of The 35-36 Ford Book. I will attempt to show them below.

Re: info on 35 ford pu jack
 

Thanks for the pictures Don, I too am looking for one of these. Is there a picture of the crank that goes with these? I don't have the '35-'36 book, I'm waiting for the pickup version.

Bill

Re: info on 35 ford pu jack
 

Bill, The jacks used a 3-piece folding crank as shown in the attached image.

Re: info on 35 ford pu jack
 

Thanks Don the jack pictures were just what I needed I hope this mesage gets through I dont have my grandson here to help run this machine

Re: info on 35 ford pu jack
 

You should probably concider getting a copy of the existing 1935 and '36 Ford Book now rather than waiting for the PU version. The chassis on the Pu's are basically identical to the passenger cars of those years. Plus the PU book may not cover the chassis completely and just reference the car book. Lawson and Jerry may correct me on that though.

Re: info on 35 ford pu jack
 

John, Sent a PM. kc

Re: info on 35 ford pu jack
 

Got it Kerk and just sent you a reply.