The Ford Barn - Ford body wood

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Ford body wood - Cubel's Fordwood (https://www.fordbarn.com/forum/showthread.php?t=60017)

Rusty1932

01-25-2012 01:42 AM

Ford body wood - Cubel's Fordwood

I am considering dropping a 1K chunk of hard-earned money on replacement body wood for my early V8. Has anyone out there had dealings with Cubel's Fordwood in Utah, either good or bad ? They require 100% down payment to start the order. Thanks.

Gilby

01-25-2012 03:23 AM

Re: Ford body wood - Cubel's Fordwood

i purchased my 1934 cowel wood--3 peices. and package tray from them-took a while. but it all worked real satisfactorly in my 1934 roadster. nice folks to do business with and real helpfull. crazybill

jimTN

01-25-2012 08:10 AM

Re: Ford body wood - Cubel's Fordwood

Bad experience. I believe someone posted another source a while back towards the east cost that had good products. You might also post on the EV8 club site.

jimTN

01-25-2012 08:13 AM

Re: Ford body wood - Cubel's Fordwood

See earlier post. It has some good alternative vendors for v8 wood.

Comet

01-25-2012 02:17 PM

Re: Ford body wood - Cubel's Fordwood

For my '33 I used Classic Wood at 1006 Raleigh st in Greensboro N C 27405 336-691-1344. Everything was sent right away except the rear qtr. window, which he told me was back ordered for two weeks until he could make more and two weeks later that piece showed up. Nice product and fits well. I highly recommend them.

Before I ordered, I had heard some not so favorable things here and on the HAMB about Cubel's

Steve Staysko

01-25-2012 04:38 PM

Re: Ford body wood - Cubel's Fordwood

I'd call Brad's Woodshop in Friday Harbor, WA 360-378-3886 his products fit like a glove and top quality....

95476

11-06-2025 11:20 AM

Re: Ford body wood - Cubel's Fordwood

.......

V8ER	11-06-2025 11:24 AM

Re: Ford body wood - Cubel's Fordwood

Another vote for Classic Wood in Greensboro. Excellent '36 wood.

DavidG

11-06-2025 12:48 PM

Re: Ford body wood - Cubel's Fordwood

Brad's in upstate Washington gets my vote based on the amount of new woodwork he has made for me.

Newc	11-06-2025 12:55 PM

Re: Ford body wood - Cubel's Fordwood

Pacific NW is Brad's Newc

Kube	11-06-2025 05:20 PM

Re: Ford body wood - Cubel's Fordwood

Quote:

Originally Posted by 95476 (Post 2421649)

I wish I had read these posts before I ordered from Cubels.
The got me for 1002.00.
Parts did not fit.
100 shipping charge on a box that cost 31.00 to return to them. (overcharges are supposed to be refunded as per their site and never were)
Wood was returned and not picked up at their post office.
Voice mailbox is full
No longer responding to e-mails.
Caveat emptor.

Yikes! That just su--s!

T Scott

11-07-2025 01:38 PM

Re: Ford body wood - Cubel's Fordwood

Quote:

Originally Posted by Steve Staysko (Post 350958)

I'd call Brad's Woodshop in Friday Harbor, WA 360-378-3886 his products fit like a glove and top quality....

Brad's without a doubt. Top notch.

uncle buck

11-09-2025 11:42 AM

Re: Ford body wood - Cubel's Fordwood

I’ve used Brad’s and Cubel’sand there is no comparison to qualit and service. Brads wins on both. Cubels is consistent in only horrible communication and overpriced shipping. Brads finish work is nice and Cubels was rough. Another positive on Brads is he provides miscellaneous hardware and instructions, Cubels- nothing. Your experience may vary but I doubt it

All times are GMT -5. The time now is 10:54 PM.