The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   1932 Ford front fenders (https://www.fordbarn.com/forum/showthread.php?t=52268)

Bill Feldman 11-05-2011 08:04 AM

1932 Ford front fenders
 

Just want to make sure that the front fenders for cars will fit a ROADSTER.

jerry grayson 11-05-2011 08:06 AM

Re: 1932 Ford front fenders
 

Quote:

Originally Posted by Bill Feldman (Post 301116)
Just want to make sure that the front fenders for cars will fit a ROADSTER.

A roadster is a CAR!!

NealinCA 11-05-2011 08:11 AM

Re: 1932 Ford front fenders
 

All 32 Ford front fenders are interchangeable. Car, pickup, truck...all the same (other than welled or non-welled)

Neal

Bill Feldman 11-05-2011 08:58 AM

Re: 1932 Ford front fenders
 

Thanks for the input. Just wanted to confirm this.

32phil 11-05-2011 09:25 AM

Re: 1932 Ford front fenders
 

When you get to the rear fenders that's when it gets ugly.
Coupes( 3W,5W & Sport), Roadsters, Cabriolet are the same....
different from 2 & 4 door sedans, Phaeton,Victoria...........
Pick ups are unique to themselves as are the panel delivery

Tom H. 11-06-2011 08:14 AM

Re: 1932 Ford front fenders
 

Quote:

Originally Posted by 32phil (Post 301151)
When you get to the rear fenders that's when it gets ugly.
Coupes( 3W,5W & Sport), Roadsters, Cabriolet are the same....
different from 2 & 4 door sedans, Phaeton,Victoria...........
Pick ups are unique to themselves as are the panel delivery

Would you happen to know if Express Body(BB195) rear fenders are the same as a panel truck?

DavidG 11-06-2011 11:56 AM

Re: 1932 Ford front fenders
 

According to the '32 chassis parts catalogue, the BB-16413 and BB-16414 rear fenders used on single rear wheel B-195 bodies are unique to that body type and are only used on the two express bodies (B-195 and B-197).

Tom H. 11-08-2011 12:18 PM

Re: 1932 Ford front fenders
 

Quote:

Originally Posted by DavidG (Post 301832)
According to the '32 chassis parts catalogue, the BB-16413 and BB-16414 rear fenders used on single rear wheel B-195 bodies are unique to that body type and are only used on the two express bodies (B-195 and B-197).

Thanks for the help David G. I am assuming by the BB prefix that they are different from a 31 197-A express body. The hunt goes on.

FlatheadTed 11-08-2011 12:40 PM

Re: 1932 Ford front fenders
 

Get some Model A rear ones that are close to your body ,then get a good body man to reform the outer swage ,
Quote:

Originally Posted by Tom H. (Post 302997)
Thanks for the help David G. I am assuming by the BB prefix that they are different from a 31 197-A express body. The hunt goes on.


Richard (EV8G) 11-08-2011 02:43 PM

Re: 1932 Ford front fenders
 

Quote:

Originally Posted by 32phil (Post 301151)
When you get to the rear fenders that's when it gets ugly.
Coupes( 3W,5W & Sport), Roadsters, Cabriolet are the same....
different from 2 & 4 door sedans, Phaeton,Victoria...........
Pick ups are unique to themselves as are the panel delivery

...except that rear fenders that fit a 1932 Panel Delivery also fit the Station Wagon. 1933 and 1934 Panel Delivery rear fenders fit nothing else, not even a 32 Panel Delivery...


All times are GMT -5. The time now is 11:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.