The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   fuel pump stand bottom tube (https://www.fordbarn.com/forum/showthread.php?t=357454)

kurt v 05-06-2026 06:59 PM

fuel pump stand bottom tube
 

Is there a place where i can buy just the tube, i have the stand but no tube ?

thanks kurt

cas3 05-08-2026 12:30 AM

Re: fuel pump stand bottom tube
 

In most decent hardware stores you can buy short pieces of tube, but the correct size?

I would be looking in the dumpster at a tractor dealer for a chunk of hydraulic tube.

Then...JB weld it in.

Also, on ebay you can buy small pieces of metal or tube in any size.

rockfla 05-08-2026 06:50 AM

Re: fuel pump stand bottom tube
 

Try Fred at Southside Obsolete or Michael Driskell at Third Gen.

marko39 05-08-2026 07:38 AM

Re: fuel pump stand bottom tube
 

You may have better luck if you buy a complete stand with tube . What engine is this for?

alchemy 05-08-2026 03:16 PM

Re: fuel pump stand bottom tube
 

First measure how long you need. Lots of parts have been swapped over the years.


All times are GMT -5. The time now is 08:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.