Mercury Pressure Plate Bolts
 

Who has them? The Ford bolts are different ….


Third Gen does not list them - if for nothing else, what is the thread size?


Thanks,



TomT

Re: Mercury Pressure Plate Bolts
 

Tom: Here ya go:
https://www.ebay.com/itm/12626397331...Bk9SR_TWy4PuZQ
http://vanpeltsales.com/FH_web/flath...ecs49-53V8.htm

Re: Mercury Pressure Plate Bolts
 

Thanks! Got 'em!

Re: Mercury Pressure Plate Bolts
 

^^^ Nicely done.

Re: Mercury Pressure Plate Bolts
 

Mid century Mercury cars that use the Borg & Beck clutch are larger diameter than the Ford bolts. The earlier post war Ford and Mercury are the same diameter. The later Mercury stuff was just a bit heavier duty. The original part number for the 3/8"-16 X 3/4" is 355538-S used from 1949 thru 1953. A lot of folks use ARP bolts for replacements. The originals are not common but GM used a lot of 3/8"-16 bolts.

Re: Mercury Pressure Plate Bolts
 

Thank you!